There's no multiplying in football

It's not's science! - Marvin Gentry-US PRESSWIRE

The new math that may help discover the next Russell Okung.

At some point Friday afternoon, as this year’s group(s) of NFL Draft Combine O-Linemen were being tested in the bench-press, I made a comment on twitter about the guys with the longest arms often having greater trouble in the bench-press. This is simple physics; as the long-limbed participants are pushing the bar-bell a longer distance than those of average arm-size. But then @DavisHsuSeattle reminded me that Seahawk Russell Okung, when he tested at the combine three years ago, had both a ridiculous 36” reach AND benched 225 lbs an insane 38 times!

Okung is now a pro-bowl player and Davis’ comment led me to wonder if there is a direct correlation between strength/length ratio and probability for future success in the league. I set out to determine a statistic (and its requisite formula) that could singularize a player’s length and his strength into one number…like an actual scientific way of determining “pound-for-pound” the best O-lineman in this year’s combine.


Photo by Kirby Lee-USA TODAY Sports

At first I simply plugged all of this year’s O-linemen (tackles, guards, and centers) into a spreadsheet with their respective length and bench numbers. I also listed Okung’s numbers from 2010 to establish a high-water mark (*Okung’s 38 reps is one of the top 6 results for an OL in the last seven years), and then I added in the numbers for Jake Long, Joe Staley, William Beatty, and Ryan Clady as higher-end representatives of successful NFL linemen. Then it was a matter of finding the right math.

My first thought: a simple ratio bench reps/arm length. That didn’t work because guys with short arms (32”) can have high bench totals (see: Eric Herman this year; 32.28”arms and 35 reps), leaving the short-armed as the leaders.

Next thought: add the (#reps/reach) to the original length. This gave almost the exact opposite result; giving all favor to guys who simply began the test with the longest arms (DJ Fluker/Rogers Gaines). I needed a way to focus on guys with great length, but then give them a pretty significant bonus for a high bench total.

Third attempt: take the arm length and add a dividend of the reps. I initially tried reps/3 but didn’t like that result…then I did reps/4 and that seemed too big of a swing the other way. So I settled on: arm length + (reps/3.5), and it seemed best. This method finally matched the eye-test high-water man (Okung) to the mathematical high-water man (Okung). This math also resulted in Jake Long coming in 2nd and Ryan Clady coming in 4th amongst our rookies…so the established, Pro-Bowl players are now on the top of the list, and the math feels reliable (incidentally; Beatty=17th, Staley=21st out of 45 tested). So whom did the chosen math favor from the 2013 class?? Rogers Gaines.

Hailing from Tennessee State University, Rogers Gaines is a monster of a man; measuring 6’6”/334lbs with 36 ¼” arms, and a bench total of 28 reps. For comparison: the other biggest dude in Indy, DJ Fluker (6’5”/339/36 3/4”arms), managed only 21 bench reps and fell to 8th of the ’13 class in my little experiment. Not much was known about Gaines (by draftniks and me) coming into the combine, and so these kind of results will send us scrambling for game-tape to see if there is more there than meets-the-eye.

In fact, the top three scorers in my test will all require further research in the coming weeks before the draft. Following behind Rogers Gaines were Youngstown U’s Lamar Mady and Azusa Pacific’s 6’8”/315 bigun Luke Marquardt. I’ve watched tape on none of the three prior to this, but will have to now.

As we work our way down the list, we begin to find more recognizable names at #4; Oklahoma’s Lane Johnson. Prior to this, many had expected Johnson to be long and fast, but to lack elite strength. Coming into the combine as a projected 1st-rounder, Johnson may have moved up into the top 10 picks by surprising many with his bench total of 28 reps (besting Eric Fisher and Luke Joeckel by 1 rep).


Photo by Matthew Emmons-US PRESSWIRE

The next three names all should be recognizable to loyal Field Gulls’ draft readers: #5-Virginia Tech’s ROT Vince Painter (Danny Kelly’s recent discovery), #6-North Carolina’s stud OG Jonathan Cooper, #7-Arkansas Pine-Bluff’s LOT Terron Armstead. Three different guys, that have been featured at three different positions (collectively), have three different draft projections (in order: 6th round, 1st round, 3rd round), but perhaps, if the math is correct, share the same career trajectory…future Pro-Bowlers.

It probably won’t go that way, but it’s an interesting ponderance. It’s also interesting to note that the top two OL guys in the whole draft came in a pretty mediocre 16th (Joeckel) and 14th (Fisher). Other notables: Larry Warford-24th, Reid Fragel-12th, Travis Bond-18th, and Jordan Mills-37th. Not included (due to missing bench test until pro-days): Chance Warmack, Menelik Watson, Brennan Williams, Xavier Nixon, and Kyle Long.


Photo by Kim Klement-US PRESSWIRE

Of course, all of this math will go for naught when the OL's take the field Saturday and actually add some running and jumping to the pushing and shoving. Then I'll just have to add 5.15, divide by pi, carry the 1, times lightspeed, to the 12th power = Win Forever!

Log In Sign Up

Log In Sign Up

Please choose a new SB Nation username and password

As part of the new SB Nation launch, prior users will need to choose a permanent username, along with a new password.

Your username will be used to login to SB Nation going forward.

I already have a Vox Media account!

Verify Vox Media account

Please login to your Vox Media account. This account will be linked to your previously existing Eater account.

Please choose a new SB Nation username and password

As part of the new SB Nation launch, prior MT authors will need to choose a new username and password.

Your username will be used to login to SB Nation going forward.

Forgot password?

We'll email you a reset link.

If you signed up using a 3rd party account like Facebook or Twitter, please login with it instead.

Forgot password?

Try another email?

Almost done,

By becoming a registered user, you are also agreeing to our Terms and confirming that you have read our Privacy Policy.

Join Field Gulls

You must be a member of Field Gulls to participate.

We have our own Community Guidelines at Field Gulls. You should read them.

Join Field Gulls

You must be a member of Field Gulls to participate.

We have our own Community Guidelines at Field Gulls. You should read them.




Choose an available username to complete sign up.

In order to provide our users with a better overall experience, we ask for more information from Facebook when using it to login so that we can learn more about our audience and provide you with the best possible experience. We do not store specific user data and the sharing of it is not required to login with Facebook.